What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 12:31

It also is a device that limits the change in current flow.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
A circuit breaker is similar, but is resettable.
How do great movie moments influence how people handle real-life moral dilemmas?
Because the load is inductive, the current lags the voltage.(by a bit).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
nine
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The MOV will conduct when the voltage exceeds 50% of line voltage.
At one ohm, the resistor has a maximum of 1 watt power.
He then describes Rainy Season and Lightning.
[old diagram got deleted by accident]
Why did you put a guy’s dick in your mouth the first time?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But… the neutral is now “floating” because of the 1 ohm resistance.
What does a fuse do?
What movies and TV shows portray realistic beauty standards?
a photo is worth a thousand words.
The bolt then partially travels down the line to your home.
This is 'the assistant's answer'
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Now when you have a certain ac resistance, then a current flows in a loop.
So, the voltage could go up to 500 volts, and the fuse will not open up.
How can people balance religious beliefs with seeking professional mental health care?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–10[John johnson John Johnson ]
I post the exact comment here.
The #1 High-Protein Snack for Better Blood Sugar, According to a Dietitian - EatingWell
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Why would a girl not want you to know she has a crush on you?
He then describes the function of a fuse.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Why do some people have loving parents and some do not?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
What is lightning?
One
In what ways Indian parents are destroying their children's life?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
so, what happens?
Is it okay or problematic to be both Black and gay in society in the 21st century?
One is “what exactly is in a ‘surge protector’ ? ”
It seems Mohan does not understand the difference between a comment and an Answer.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What is your review of the Redmi 9A? Is it worth buying?
2024–10–16 [ OO OLAOYE OYEBODE ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–14 [Omar Gharbi Omar Gharbi ]
There are two important concepts here.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
An AC voltage/ current source, and an ac inductive load.
This is where this question deviates from being a 'generic' question, and becomes more specific.
But it can get overloaded, and no longer works.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The third is lightning and “how it gets conducted into a home.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Edit 2024–10.
the problem then depends on "how fast does the fuse operate?".
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At least they know the answer if they wanted it.
The other is “what does a “fuse” do?”
This is where the MOV conducts again, and dissipated the energy.
Upvotes:
He then asserts :
but I think this circuit , shows a few more pieces.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
but this device (an Inductor) … impedes the rapid changes in the current.
First Sentence:
This one hit behind the barn.
[image of Common-mode choke]
There are three different concepts here that are getting confused.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Here is a simplified AC power diagram.
A fuse is a non-resetable over current circuit protector.
These are simplified answers to the original question, and does not change anything I wrote above.
(Dc diagram shown, AC is similar).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
eight
These devices are installed between the “hot” and “neutral” and protective ground.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This device then solves the entire problem.
what exactly is a ‘surge’ protector?
For this case there are devices called Metal oxide varistors (MOV).
In schematic diagrams this is the symbol for a fuse:
Barnstars:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”